Basic items for scheduled maintenance of gas stations

Three common methods for cleaning the interior of a sled mounted gas station

At present, the market share and ideal position of sled mounted gas stations are gradually increasing, mainly due to their unique advantages and performance. However, even the best products can still have problems if used for a long time without maintenance. Large refueling equipment like sled mounted gas stations should be maintained on time. Today we will mainly introduce the three methods of internal cleaning operation in the maintenance of sled mounted gas stations.

1. Cleaning of pried gas stations

Our company has professional cleaning solutions for the pry mounted gas stations provided by various enterprises, mainly using the pry mounted pump that comes with the pry mounted equipment for cleaning, depending on the internal settings of the device. When considering which company to choose for cleaning and construction, price is one aspect, and safety is more important.

2. Cleaning of oil products for sled mounted gas stations equipped with barrier explosion-proof modifications

It was originally a gasoline tank, but after cleaning it, I want to replace it with a diesel tank; Or if it was originally a diesel tank and was replaced with a gasoline tank after cleaning, only the method of material cleaning can be used. The advantage of this cleaning method is cleanliness and thoroughness, but it is difficult to operate and requires high technical content, so the cost is much higher than mechanical cleaning.

3. Skid mounted gas stations equipped with barrier explosion-proof modifications for cleaning without changing oil products

There are two methods for this type of oil tank:

One is to use mechanical cleaning: Our company has an explosion-proof dialysis type circulating cleaning device, and construction personnel do not need to enter the tank for operation. The oil undergoes three filters to filter and precipitate impurities such as rust, water, and residue, thus achieving the cleaning effect.

The second method is to use material cleaning: remove the materials, manually clean the tank, and then put the materials back into the tank. The materials can also be reused.

The above three aspects are the basic methods for cleaning the interior of a sled mounted gas station. Equipment maintenance and upkeep are the most important methods and measures to delay its service life. Therefore, necessary maintenance work must be done well in daily use.

The addition of oil and gas recovery system adds icing on the cake to the sled mounted gas station

The continuous popularization and recognition of this sled mounted gas station, as well as the continuous development of its other functions, have injected fresh blood into sled mounted gas stations with the recent introduction of oil and gas recovery systems. Today, we will introduce the specific functions added to sled mounted gas stations with oil and gas recovery systems.

The purpose of this utility model is to overcome the above-mentioned shortcomings and provide a high safety, non polluting, and resource-saving oil and gas recovery system for a levered refueling device. The purpose of this utility model is achieved as follows: it includes a horizontal oil storage tank, a refueling machine panel, a submersible pump, a refueling pipe, and an oil gun; A fuel dispenser panel is installed on the oil storage tank, and an oil gun is installed on the fuel dispenser panel. A submersible pump is installed inside the oil storage tank, and the output end of the submersible pump is connected to the oil gun through a refueling pipe; The pull off valve of the oil gun is connected to an oil and gas recovery pipe, which is connected to the oil and gas inlet at the top of the oil storage tank. An oil and gas recovery pump is installed on the oil and gas recovery pipe, and a pneumatic breathing valve is installed at the top of the oil tank. The fuel dispenser panel is located in the middle of the front of the oil storage tank, and is in contact with the tank body. Compared with existing technologies, the beneficial effect of this utility model is that the oil and gas recovery pump opens and works simultaneously during refueling in the refueling system. It adopts negative pressure to recover the oil and gas generated during refueling into the storage tank, preventing the oil and gas from evaporating into the atmosphere, avoiding unsafe accidents, protecting the environment, and saving resources.

Automobile gas stations are usually composed of buried atmospheric pressure oil storage tanks and tax controlled fuel dispensers. Buried oil storage tanks are buried underground for a long time. Once there is a leak in the tank wall or oil pipeline, it is difficult to detect and the consequences are unimaginable; Moreover, this type of oil storage tank is buried underground, which requires a large investment, occupies a large area, and has poor flexibility. It is not suitable for specific usage areas such as suburban areas and airports where vehicle traffic is limited. To overcome the above shortcomings, a pry mounted refueling device has emerged, but the existing pry mounted refueling device is a fuel dispenser. Oil storage tanks are combined together to achieve refueling function, and their oil and gas recovery is usually placed below the pipeline with oil and gas recovery wells, also known as oil collectors. During the refueling process, oil and gas will evaporate into the atmosphere, wasting resources and causing environmental pollution, while also posing significant safety hazards. And it is easy to cause environmental pollution.

The above are the specific functional characteristics of the sled mounted gas station with added oil and gas recovery system, which undoubtedly adds wings to its competitiveness in the industry. The above analysis is hoped to be helpful to everyone.

Written by

TAIAN SHENGDING METAL CONTAINER MANUFACTURING CO., LTD.

Editor Wang

www.self-bunded-tank.com

WhatsApp : +86 152 5486 3111

Email :shengdingtank@126.com